| Back Next |
Back Next |
|||||||||
![]() |
PETZL Sequoia Swing The Petzl Sequoia Swing is the new generation of lightweight tree climber's harness. Features include the following: The two gated alloy side rings allow you to customize the harness in the following ways: 1. Adjust the weight distribution between the waistbelt and the leg loops 2. Change the length of the attachment bridge or install two attachment bridges 3. Attach a swivel directly to the floating bridge Codes for Sizes:
|
|||||||||
![]() |
PETZL Suspension Bridge Replacement floating attachment bridge for the Petzl Sequoia Harness. The bridge is designed to improve the climber's lateral mobility and to distribute load evenly between the waistbelt and leg loops. The two gated rings on the front of the harness allow the replacement bridge to be installed. A swivel, pulley, ring (I612,C04620) or karabiner can be attachment directly to the bridge. Please note that the bridge will wear and will require replacement on a regular basis depending on the frequency and type of use. Available in three different lengths as shown in the table below Codes for Sizes:
|
|||||||||
![]() |
PETZL Attachment Ring S $21.12 Designed to be used on the suspension bridge of the Sequoia Harness. Size: 28mm Weight: 4gm. Code: I611,C04620 |
|||||||||
![]() |
SALA Arborist Harness Function: Tree Surgeon/Arborist harness. Features: Composition: Codes for Sizes:
|
|||||||||
![]() |
SRT Glider Arborist Harness Codes for Sizes:
|
|||||||||
| Back Next |
Back Next |
20120308